电动门操作端有三个按钮，卷帘门别离接着一根线，还有一条公共线，将开门按钮的这条线和公共线接到门禁操控器的继电器操控端的 NO和COM即可。这样就能够经过刷卡操控翻开主动门了。一般状况，电动门有三个功用按钮，即 开门，暂停，关门。
There are three buttons at the operation end of the electric door. The rolling shutter door is separated from another line and a common line. Connect this line and the common line of the door opening button to the no and com of the relay control end of the access control device. In this way, the active door can be opened by swiping the card. Generally, the electric door has three function buttons: open, pause and close.
门禁体系能完成的即是对 开门 功用的操控，而电动门的 暂停 和 关门 功用，则是由电动门自行操控的.大多数老类型的电动门中止和关门都是手动按钮操控的，新式的电动门有的预留了主动关门，主动防夹人夹车的规划，门翻开到位后检测到无障碍物能够主动关门
What the access control system can accomplish is to control the function of opening the door, while the function of suspending and closing the electric door is controlled by the electric door itself. Most of the old types of electric doors are controlled by manual buttons. Some of the new types of electric doors reserve the planning of active closing, active anti pinch people and cars. When the door is opened in place, it can close the door automatically when there is no obstacle detected
. This function is attributed to the function of the active door, and the access controller is temporarily unable to operate. The frequent on-off current and voltage of the electric door button will cause great disturbance, and even cause the crash or restart. Please install the central relay or other isolation control circuit under the telephone guidance of our technical personnel, so that the goods can operate safely and stably for a long time.
Electric roller shutter door in the transfer process, or in the process of use, if the transfer, or improper use, there may be a wrong tooth appearance. Then it will lead to the dislocation or opening of the electric door, and the sealing is not smooth, that is, the closing time is not very close. At this time, we should pay attention to prevent the above questions. When the electric door is shipped, we should use two strips of adhesive tape to fix the electric door, and then prevent the appearance of "wrong teeth" caused by external force during the transportation; In addition, the warning label is pasted on the top of the chassis to remind the user not to pull the electric door in a straight direction, nor to push the electric door with one foot, resulting in uneven force and artificial appearance of wrong teeth. It can also manually push the "electric door" towards the closing direction (with a little force) to proofread the gear set, and then correct the "wrong tooth" appearance.
The electric roller shutter door plays an infinite role in the safety of the working environment, or in the management of personnel attendance and other administrative operations. Today's electric door development skills will continue to progress, the future production skills will be more high-tech, and for safety questions, it will be the primary development direction of electric door in the future. To constantly improve the shortcomings of the electric door.