There are many ways to choose and use Jinan roller shutter door. In order to improve the utilization rate of roller shutter door, users should pay special attention. However, many users are not particularly clear about the relevant content and do not know how to choose. The following details. Users can refer to it and apply it.
1. In the selection of materials, light raw materials should be considered. In special cases, the raw materials used can be a big problem.
2. Motor selection is an important part. There is not enough power on the line, because the passenger capacity will gradually reduce the efficiency, so try to exceed the curtain movement to improve the intensity.
3. Study whether the structure is good, whether the lubrication degree is good, and whether the cooling speed of the roller shutter is good, and select the full rolling gear to improve the overall movement life.
4. Brand is an indispensable element. In order to reduce the cost, small shutter manufacturers should consider the brand when purchasing, and can not guarantee the quality.
5. The louver shall be well drained and the air pressure balance hole shall be treated at the staggered position.
6. Aluminum slide rail is installed at the lower part of window frame for daily maintenance. The overall condition of double pulley gate is better than that of single pulley gate.
7. The appearance color of the door, if blue and white are better, the color is too white or gray, indicating that the material of the door is not good, the stability of the material is not high, and the door will turn yellow as time goes on.
8. The steel lining of the door is professional, and the good door sealing shall be flat, without curling, groove, tape smell, and the good door and window flanging, sealing and other auxiliary materials shall match with the main materials.
1. Reliable fire fighting facilities are required at the upper end of the installation position of Jinan rolling shutter door. When a manufacturing box or ceiling is provided, a movable cover is provided at the lower end of the door. The lower end of the gantry crane is guaranteed to have a 500mm detachable inspection hole for easy maintenance.
2. The opening and closing directions of all doors are the same as those of the opening and closing boxes. In particular, when a new trial operation or switching on the power supply phase line to convert the external input power, the manual equipment shall use 1 / 2 of the height of the door opening hole, and then open it after opening the door. The door is usually used before the command is given, otherwise the plug may be damaged, causing loss, such as rewinding and jacking of opening and closing devices.
Jinan roller shutter door
3. When operating the rolling shutter door, stand at the position where you can see the running state, otherwise it is easy to cause accidental damage.
4. Do not contact acid or alkaline solution between curtain and door operator to protect curtain surface from corrosion. The operation, sliding, transmission and other parts of the door shall be inspected regularly (at least twice a year), and fuel shall be added if necessary to ensure the normal use of the door.
We would like to remind you that we should do a good job in cleaning and maintenance of Jinan roller shutter at ordinary times, so that the roller shutter can give full play to its role. We suggest that you can refer to the above content for a series of applications, so that the roller shutter door can be used for a long time.