卷帘门在我们生活中随处可见，然而你知道是什么让卷帘门能够上下拉动上万次吗?今天我们就来见识见识济南卷帘门的卷轴是怎么生产的，小编为您解说下吧。

Rolling shutter doors can be seen everywhere in our life, but do you know what makes rolling shutter doors can be pulled up and down thousands of times? Today, let's see how the scroll of Jinan roller shutter door is produced. Let's explain it for you.

卷轴作为卷帘门的核心部件，它的质量将直接决定卷帘门的使用寿命。而卷轴的结构很简单，一般都是由弹簧和和卷轴共同组成。

As the core component of roller shutter door, its quality will directly determine the service life of roller shutter door. The structure of the reel is very simple, which is generally composed of a spring and a reel.

在生产卷轴时主要的工作就是卷弹簧，卷轴上的弹簧都是用弹簧钢片卷曲而成的，所以在卷弹簧的时候就需要用到弹簧卷料机。弹簧卷料机的结构也非常简单，主要就是一个转轴。

The main work in the production of the reel is to roll the spring. The springs on the reel are all rolled with spring steel sheets, so the spring coiler is needed when rolling the spring. The structure of the spring coiler is also very simple, mainly a rotating shaft.

机箱在使用时直接把钢制转轴用螺栓固定在机箱上，耳钢制转轴上穿着几个弹簧，和另一端则是用铁架子把转轴架起来，把弹簧和分开一定距离之后就可以开始上弹簧钢片了，直接把弹簧钢片用螺丝固定在转轴上。

When the chassis is in use, the steel rotating shaft is directly fixed on the chassis with bolts. Several springs are worn on the ear steel rotating shaft, and the rotating shaft is supported with an iron frame at the other end. After the spring and the spring are separated for a certain distance, the spring steel sheet can be installed, and the spring steel sheet can be directly fixed on the rotating shaft with screws.

而弹簧卷料机上的钩子则是用来拉住弹簧和的，在启动卷料机之前，还要在弹簧钢片上抹上一点润滑油，卷料机一起动，带着转轴一起旋转，弹簧钢片很快就被卷起来了，后用钢筋固定就可以了。

The hook on the spring coiler is used to pull the spring and the spring. Before starting the coiler, a little lubricating oil should be applied to the spring steel sheet. Once the coiler starts, it rotates with the shaft, and the spring steel sheet is quickly rolled up and then fixed with steel bars.

此外定期验收电动卷帘门上下开关、在行程控制器上加一些润滑剂、确保正常、良好的操作。此外、操作者手动控制卷帘、验收运行状态、并校准上下行程开关的位置、以确保电动卷帘在打开或关闭时处于适当的位置。

In addition, regularly check and accept the up and down switches of the electric roller shutter door, and add some lubricant to the travel controller to ensure normal and good operation. In addition, the operator manually controls the roller shutter, accepts the operation status, and calibrates the position of the up and down travel switches to ensure that the electric roller shutter is in the proper position when it is opened or closed.

在验收过程中、防止电动卷帘门顶部、底部或反转、并且发生紧急情况。要立即暂停旋转、请断开电源。更多注意事项就来我们网站http://www.jnzxmy.com咨询了解吧。

During the acceptance process, prevent the top, bottom or reverse rotation of the electric roller shutter door and emergency. To suspend rotation immediately, disconnect the power supply. More notes on our website http://www.jnzxmy.com Ask and understand.