如果你已经买了车库门，那么一定目睹过它偶尔发生的一些小故障，虽然很少发生，但是还是需要了解的。下面跟着小编一起来看看济南车库门使用期间的五点小故障处理。

If you have bought a garage door, you must have seen some small faults that happen occasionally. Although they rarely happen, you still need to know. Now let's follow the small editor to see how to deal with the five small faults during the use of the garage door in Jinan.

1、用手动开关或遥控器不能启动驱动装置，驱动装置没有接通电源，手动开关或遥控接收板断路，运行次数过多导致电机热保护，检查插座、插头、手动开关、保险管熔丝，检查手动开关及遥控接收板接线，重新定位行程开关以增加行程;

1. The driving device cannot be started with the manual switch or remote control, the driving device is not powered on, the manual switch or remote control receiving board is open circuit, and the motor thermal protection is caused by too many times of operation. Check the socket, plug, manual switch, fuse of the fuse, check the wiring of the manual switch and remote control receiving board, and reposition the travel switch to increase the travel;

2、车库门关不严或开不完全，行程开关位置调节不正确，重新定位行程开关以增加行程;

2. The garage door is not closed tightly or opened completely, and the position of the travel switch is adjusted incorrectly. Reposition the travel switch to increase the travel;

3、手动开关能控制驱动装置而遥控器不能，遥控器未对码，遥控系统故障，按照说明书指导完成对码操作，更换遥控器内部电池，请维修人员检查接收控制板;

3. The manual switch can control the drive device, but the remote control cannot. The remote control does not match the code. The remote control system fails. Complete the code matching operation according to the instructions. Replace the internal battery of the remote control. Ask the maintenance personnel to check the receiving control board;

4、车库门未关紧就自动反向运行或开门时未接触行程开关就中途停止运行，开关门阻力大于设置启闭负载力了障碍感应系统，连杆长度调节不当，拉开离合装置，检验门体与扭簧是否平衡、启闭是否灵活，增大开闭负载力，在门关闭时调节连杆长度;

4. The garage door automatically runs in the reverse direction when it is not closed tightly, or stops running halfway when it is not contacted with the travel switch when opening the door. The resistance of opening and closing the door is greater than the set opening and closing load force, which activates the obstacle sensing system. The length of the connecting rod is not adjusted properly, open the clutch device, check whether the door body and the torsion spring are balanced, whether the opening and closing are flexible, increase the opening and closing load force, and adjust the length of the connecting rod when the door is closed;

5、门体单向运行行程开关损坏或行程开关线短路，光电开关光路上有障碍物启闭负载力调节没有到位，检查行程开关及行程开关接线，光电形状光路上的障碍物，重新调节启闭负载力。

5. The one-way travel switch of the door body is damaged or the travel switch wire is short circuited. There are obstacles in the optical path of the photoelectric switch. The opening and closing load force is not adjusted properly. Check the travel switch and the travel switch wiring, remove the obstacles in the photoelectric shape optical path, and readjust the opening and closing load force.

车库门使用期间的五点小故障处理相关内容就讲解到这里了，您对此有什么疑惑或者需求可以关注我们网站http://www.jnzxmy.com进行咨询！

This is the end of the five points related to the troubleshooting of the garage door during its use. If you have any doubts or needs, please follow our website http://www.jnzxmy.com Consult!