驱动电机：快门选用制动减速电机，制动速度快，噪音低。一般来说，市面上卖的快门电机，制动效果欠好或许制动噪音大，不适合运用。速比为1: 10-1: 15。这是一种新的操控形式。当操作中止时，它不会。#039;t不需求依靠刹车来刹车，干声进一步降低了底。百叶窗的电机要定期查看，看有无毛病，毛病要及时修理，防止严重毛病。

Drive motor: The shutter adopts a braking and deceleration motor, which has fast braking speed and low noise. Generally speaking, shutter motors sold on the market may have poor braking performance or high braking noise, making them unsuitable for use. The speed ratio is from 1:10 to 1:15. This is a new form of control. When the operation is aborted, it will not# 039; T does not need to rely on brakes to brake, which further reduces the dry noise. The motor of the blinds should be checked regularly to see if there are any problems, and the problems should be repaired in a timely manner to prevent serious problems.

今天，边肖将告知你查看和维护快门电机的注意事项：

Today, Bian Xiao will inform you of the precautions for checking and maintaining the shutter motor:

1.只能依据当时备件清单运用原装备件；

1. Original spare parts can only be used based on the current spare parts list;

2.替换制动线圈时，应同时替换快门的制动操控装置；

When replacing the brake coil, the brake control device of the shutter should be replaced at the same time;

3.电机在工作过程中温度可能会变得很高，有烫伤的风险；

3. The temperature of the motor may become very high during operation, which poses a risk of burns;

4.紧固或降低升降驱动装置(有坠落的风险)；

4. Tighten or lower the lifting drive device (there is a risk of falling);

时刻距离:当用作工作制动器时，查看每个3000工作少一次，首要查看快速门制动器丈量摩擦片的厚度.丈量和调整工作气隙.压板.花键套.啮合和中止推环；

Time distance: When used as a work brake, check at least once for every 3000 operations. First, check the thickness of the friction plate of the quick door brake, measure and adjust the working air gap, pressure plate, spline sleeve, engagement and stop push ring;

本文由济南卷帘门友情奉献.更多有关的知识请点击:http://www.jnzxmy.com真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is dedicated by Jinan Roller Shutter Door. For more information, please click: http://www.jnzxmy.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned