现代车库门款式有很多，遥控、电动、手动等等，业主在选购的时候，不仅要选择车库门材质，车库门尺寸也是不能忽略的。车库门尺寸一般多大合适？装一网为您解答。

　　There are many styles of modern garage doors, such as remote control, electric, manual, etc. When choosing, homeowners not only need to choose the material of the garage door, but also the size of the garage door cannot be ignored. What is the appropriate size for a garage door? Install a website to answer your questions.

　　车库门分类

　　Garage door classification

　　经过多年的发展后，车库门形成几个种类： 普通彩钢板车库门、实木车库门、铜质车库门等。

　　After years of development, several types of garage doors have emerged: ordinary color steel plate garage doors, solid wood garage doors, copper garage doors, etc.

　　一、电动(铜质)车库门

　　1、 Electric (copper) garage door

　　铝合金实木结构的车库门，由于木材的特性受气候湿度等环境影响，开裂是不可避免。虽然可以通过烘干、油漆等工艺减小开裂，但不能做到完全避免。

　　The garage door with aluminum alloy solid wood structure is inevitably cracked due to the characteristics of the wood being affected by climate, humidity and other environmental factors. Although cracking can be reduced through processes such as drying and painting, it cannot be completely avoided.

　　而铜质车库门，采用外包铜皮和内充聚氨酯的结构，这两种材料都非常稳定，不会出现变形的情况，因此维护保养非常方便。有的用铜皮取代门板聚氨酯发泡门板两面的彩钢板，外观古朴，适用于高档别墅的车库门。

　　The copper garage door adopts a structure of external copper skin and internal polyurethane filling, both of which are very stable and will not deform, making maintenance very convenient. Some use copper skin instead of polyurethane foam door panels and color steel plates on both sides of the door panels, which have a simple and noble appearance and are suitable for garage doors in high-end villas.

　　二、实木车库门

　　2、 Solid wood garage door

　　实木车库门：实木车库门(又称钢木车库门)结构采用2.0毫米钢架结构，输入防夹手设计元素，每一块门板采用上下两条钢板，用冷轧设备加工成防夹手形状，开槽后的实木门板嵌入钢架内，竖档和防夹手钢结构之间采用点焊设备连接，焊点平整牢固。

　　Solid wood garage door: The structure of the solid wood garage door (also known as the steel wood garage door) adopts a 2.0mm steel frame structure, with anti pinch design elements input. Each door panel is made of two upper and lower steel plates, processed into an anti pinch shape by cold rolling equipment. The slotted solid wood door panel is embedded in the steel frame, and the vertical bracket and anti pinch steel structure are connected by spot welding equipment, with smooth and firm welding points.

　　三、遥控车库门

　　3、 Remote control garage door

　　1、微电脑程序控制，使用方便，按遥控手柄即可，且电机自带自动延时照明灯。

　　1. Microcomputer program control, easy to use, just press the remote control handle, and the motor comes with automatic delay lighting.

　　2、超级静音，绿色。

　　2. Super silent, environmentally friendly.

　　3、停电有应急锁，开关容易。

　　3. There is an emergency lock for power outages, and it is easy to switch on and off.

　　4、、牢固，双层彩钢板，门板总厚度4-5公分，门体中间采用国际公认的保温隔热隔音材料——聚氨酯。

　　4. Safe and sturdy, double-layer color steel plate, with a total thickness of 4-5 cm for the door panel. The middle of the door body is made of internationally recognized thermal insulation and sound insulation material - polyurethane.

　　5、美观、高雅，简洁大方。

　　5. Beautiful, elegant, simple and generous.

　　6、遇阻反弹，保证人车。

　　6. Rebound when encountering obstacles, ensuring the safety of people and vehicles.

　　7、原理科学，门内置扭簧，扭力和门重量相当，使门体处于“零重量”状态，且在轨道内靠滑轮运行，故阻力小，耗能少，维修率低，经久耐用。

　　7. The principle is scientific. The door is equipped with a built-in torsion spring, which has a torque equivalent to the weight of the door, keeping the door in a "zero weight" state. It also operates on a pulley within the track, resulting in low resistance, low energy consumption, low maintenance rate, and durability.

　　8、零部件拆卸及更新方便，有利于维护。

　　8. The disassembly and updating of components are convenient and conducive to maintenance.

　　9、保温性、抗风性、密封性较好。

　　9. Good insulation, wind resistance, and sealing performance.

　　车库门尺寸一般多大合适?

　　What is the appropriate size for a garage door?

　　一般情况下住户自备车为小型车辆，其中以轿车占大多数。所以家庭车库门尺寸应以中型轿车4.9m长X1.8m宽x1.8m高为设计标准车型尺寸，据此的停车位尺寸应为(5—6)m长x(2.5—3)m宽，车库车道的宽度及转弯半径也应据此数据进行设计。

　　Generally, residents bring their own small vehicles, with sedans accounting for the majority. Therefore, the size of the home garage door should be based on the design standard size of a medium-sized sedan, which is 4.9m in length, 1.8m in width, and 1.8m in height. The corresponding parking space size should be (5-6) m in length, and (2.5-3) m in width. The width and turning radius of the garage lane should also be designed based on this data.

　　一般车库设计尺寸规划停车位尺寸的时候，可以参考以下尺寸标准：

　　When designing and planning the size of parking spaces in a general garage, the following size standards can be referred to:

　　1、大车停车位

　　1. Large car parking space

　　大车停车位宽4米，长度7米到10米，视车型定。

　　The parking space for large vehicles is 4 meters wide and 7 to 10 meters long, depending on the vehicle model.

　　2、小车停车位

　　2. Car parking space

　　小车停车车位，宽度2.2米到2.5米，长度5米。

　　Car parking space, with a width of 2.2 meters to 2.5 meters and a length of 5 meters.

　　3、旁边道路小车

　　3. Small car on the nearby road

　　单面停车5米宽，双面6米，大车8米。

　　Single sided parking with a width of 5 meters, double-sided parking with a width of 6 meters, and large vehicles with a width of 8 meters.

　　车库门选购知识

　　Garage door selection knowledge

　　1、选择好的别墅车库门应该具备，手指保护功能、良好密封性能、遇阻反弹功能、手动开启功能、防撬、报警功能等。

　　1. A good choice of villa garage door should have finger protection function, good sealing performance, rebound function in case of obstruction, manual opening function, anti pry, alarm function, etc.

　　2、选准门框

　　2. Select the right door frame

　　它的作用主要是调节车库土建的误差，将车库调整到完全的横平竖直，这样可以减少别墅车库门在使用过程中与导轨的摩擦，从而达到降低噪音，延长别墅车库门使用寿命的作用，可以起到密封防止风沙及保温的作用。

　　Its main function is to adjust the errors in the garage construction, making the garage completely horizontal and vertical. This can reduce the friction between the villa garage door and the guide rail during use, thereby reducing noise and extending the service life of the villa garage door. It can also serve as a seal to prevent sandstorms and provide insulation.

　　3、手指保护功能

　　3. Finger protection function

　　它是一个重要的功能，即在别墅车库门门板和门板结合处做手指保护处理。提供这种手指保护装置可以确保您和家人的，是非常有必要注意的。

　　It is an important function that provides finger protection at the junction of the villa garage door panel and the door panel. Providing this finger protection device can ensure the safety of you and your family, and it is very necessary to pay attention to it.

　　4、遇阻回升的功能

　　4. The function of rebounding when encountering obstacles

　　就是别墅车库门在运行过程中遇到阻碍会停止运行并释放阻碍物，可以有效保障人车。例如，门处在关闭过程中，而你的爱车或爱子仍在门下停留，这时门在运行过程中遇到5公斤阻力时会自动回升，保证您的爱车和爱子的。

　　The villa garage door will stop running and release obstacles when encountering obstacles during operation, which can effectively ensure the safety of people and vehicles. For example, if the door is in the process of closing and your car or beloved child is still parked under the door, the door will automatically rebound when encountering a resistance of 5 kilograms during operation, ensuring the safety of your car and beloved child.

　　5、配件

　　5. Accessories

　　是需要防锈处理，别墅车库门的重量大部分靠扭簧;轨道的厚度与宽度也是决定一个门体稳定性能的关键部分。

　　Firstly, rust prevention treatment is required, as most of the weight of villa garage doors relies on torsion springs; The thickness and width of the track are also key factors determining the stability performance of a gate body.

　　6、安装技术

　　6. Installation Technology

　　由于别墅车库门没有统一标准，安装难度大，要选择技术好的师傅安装别墅车库门，这样出来的门用一根手指头可以拉上拉下，而且上升力稍大于下降力，调试运行时，没有杂音。

　　Due to the lack of a unified standard for villa garage doors and the difficulty of installation, it is necessary to choose a skilled technician to install the villa garage door. This way, the door can be pulled up and down with just one finger, and the upward force is slightly greater than the downward force. During debugging and operation, there is no noise.

　　车库门安装步骤

　　Installation steps for garage door

　　一、轨道的安装

　　1、 Installation of tracks

　　根据门板的宽度和高度确定两轨道固定性的位置并用水平管测水平，再用M8×41㎜的方头螺钉固定。用卷尺测准水平轨与墙壁及两水平轨之间的间距，用水平尺测准水平轨的水平，然后用M6.4×14㎜的小帽螺丝和六角螺帽将水平轨连接件与水平轨和轨道固定性连接固定。用带眼角钢制成两个三角架，然后将其与水平轨的末端用M6.4×14㎜的小帽螺丝、螺帽连接，并用M8×70㎜的膨胀螺栓固定到天棚或墙壁上。

　　Determine the fixed position of the two tracks based on the width and height of the door panel, measure the level with a horizontal tube, and then fix it with M8 × 41mm square head screws. Use a tape measure to measure the distance between the horizontal rail and the wall, as well as between two horizontal rails. Use a level ruler to measure the level of the horizontal rail, and then use M6.4 × 14mm small cap screws and hex nuts to securely connect and fix the horizontal rail connector to the horizontal rail and track. Make two triangular brackets with corner steel, then connect them to the end of the horizontal rail with M6.4 × 14mm small cap screws and nuts, and fix them to the ceiling or wall with M8 × 70mm expansion bolts.

　　二、扭簧的安装

　　2、 Installation of torsion spring

　　将扭簧中心支架、尼龙胶圈、固定法兰、与门体重量相匹配的扭簧、锁紧法兰、绕线轮、轴承支架按顺序(分清左右侧)套在镀锌钢管上，并注意各零部件是否安装正确。用M8×41㎜的方头螺钉将扭簧中心支架固定到洞口上部中间位置的短木板上，并注意避开链盒的安装位置。

　　Insert the torsion spring center bracket, nylon rubber ring, fixed flange, torsion spring that matches the weight of the door body, locking flange, winding wheel, and bearing bracket in order (distinguish left and right sides) onto the galvanized steel pipe, and pay attention to whether each component is installed correctly. Use M8 × 41mm square head screws to fix the torsion spring center bracket to the short wooden board in the middle of the upper part of the hole, and be careful to avoid the installation position of the chain box.

　　用M8×40㎜的螺栓将扭簧中心支架、尼龙胶圈、固定法兰和扭簧连接，再将扭簧和锁紧法兰连接。然后将轴承支架的下端用M9.5×19㎜的大帽螺丝和螺帽与水平轨连接件连接固定，轴承支架的上端用M8×41㎜的方头螺钉固定到侧木框上。

　　Use M8 × 40mm bolts to connect the torsion spring center bracket, nylon rubber ring, fixing flange, and torsion spring, and then connect the torsion spring to the locking flange. Then connect and fix the lower end of the bearing bracket to the horizontal rail connector with M9.5 × 19mm cap screws and nuts, and fix the upper end of the bearing bracket to the side wooden frame with M8 × 41mm square head screws.

　　三、门板的安装

　　3、 Installation of door panels

　　将底密封条放到底门板的底部，并用M4×16㎜或M6.4×16㎜的自攻钉将其从背面固定到门板上。将底轮支架放到门板的两侧近底密封条的位置，1#折页分别放到门板顶部的左中右三个位置上(宽度低于10英尺，中间位置是一个;宽度在10英尺14英尺，中间位置是二个;宽度在15英尺18英尺，中间位置是三个)，并分别用M6.4×16㎜的自攻钉固定。

　　Place the bottom sealing strip at the bottom of the door panel and secure it to the door panel from the back using M4 × 16mm or M6.4 × 16mm self tapping screws. Place the bottom wheel bracket on both sides of the door panel near the bottom sealing strip, and place the 1 # hinge on the top of the door panel at the left, middle, and right positions (one for widths less than 10 feet, two for widths between 10 feet and 14 feet, and three for widths between 15 feet and 18 feet), and fix them with M6.4 × 16mm self tapping screws.

　　然后将滚轮涂上甘油穿入底轮支架和1#折页中，将此门板放到立好的轨道里并使其水平。将2#折页、3#折页、4#折页、顶轮支架按顺序分别固定到各块门板顶部的左右位置，各块门板中间位置的连接采用1#折页。将各块门板按顺序放到已立好的轨道里，用M6.4×16㎜的自攻钉连接各折页与各门板，使各块门板组合成一体。

　　Then apply glycerin to the roller and insert it into the bottom wheel bracket and the 1 # fold. Place the door panel on the upright track and make it horizontal. Fix the 2 # folding, 3 # folding, 4 # folding, and top wheel bracket in order to the left and right positions on the top of each door panel, and connect the middle position of each door panel using the 1 # folding. Place each door panel in order onto the already erected track, and use M6.4 × 16mm self tapping screws to connect each fold to each door panel, so that each door panel is combined into one.

　　四、扭簧的上劲

　　4、 The upward force of a torsion spring

　　将钢丝绳带环的一端套在底轮支架的钩轴上。按照规定的上劲表给扭簧上劲，不要超过或低于规定圈数的半圈，别住钢棍，将钢丝绳的另一端挂在绕线轮上，绷紧钢丝绳，锁住绕线轮，再锁住锁紧法兰，撤下别住的钢棍。此过程具有极大的危险性，必须注意，既要保护好自己，又要避免伤及他人。

　　Insert one end of the steel wire rope loop onto the hook shaft of the bottom wheel bracket. Apply force to the torsion spring according to the prescribed force gauge, not exceeding or falling below half of the specified number of turns. Secure the steel rod, hang the other end of the wire rope on the winding wheel, tighten the wire rope, lock the winding wheel, then lock the locking flange, and remove the secured steel rod. This process is highly dangerous and requires attention to safety. It is necessary to protect oneself while avoiding harming others.

　　五、调整

　　5、 Adjustment

　　用手将门升降数次，观察门体运行是否平稳，扭簧的力量是否适当，然后做具体调整并紧固各连接部分的螺丝。

　　Lift and lower the door several times by hand, observe whether the door runs smoothly, whether the force of the torsion spring is appropriate, and then make specific adjustments and tighten the screws of each connecting part.

　　六、电机的安装

　　6、 Installation of motor

　　将链盒与电机连接并固定。将链盒前端的U形架固定到扭簧中心支架上面的木板上并居中，连接链盒。用带眼角钢做成“∏”支架，下端与电机用M8连接固定，上端用两个M8×70㎜的膨胀螺栓固定到天棚上。用M6.4×16㎜的自攻钉将钩座固定到顶门板顶部的中间位置上，连接钩子。接上电源，观察电机的运行情况，调整上下行程。

　　Connect and secure the chain box to the motor. Fix the U-shaped bracket at the front end of the chain box onto the wooden board above the torsion spring center bracket and center it, connecting the chain box. Make a "∏" bracket with corner steel, fix the lower end to the motor with M8 connection, and fix the upper end to the ceiling with two M8 × 70mm expansion bolts. Use M6.4 × 16mm self tapping screws to fix the hook seat to the middle position of the top of the top door panel and connect the hook. Connect the power supply, observe the operation of the motor, and adjust the up and down stroke.

　　七、布线

　　7、 Wiring

　　用Φ1.0线径的白色护套线，从电机尾部的电动开关接线端子中引出，顺着电机吊架布到洞口左侧距地面1.2 M处，每隔500㎜钉一个线卡子，然后接上手动开关。布线要横平竖直，既美观又合理。

　　Use a white sheathed wire with a diameter of 1.0 to lead out from the electric switch terminal at the end of the motor, and follow the motor hanger to the left side of the hole at a distance of 1.2 meters from the ground. Nail a wire clip every 500mm, and then connect the manual switch. The wiring should be horizontal and vertical, both aesthetically pleasing and reasonable.

　　八、提手的安装

　　8、 Installation of handle

　　提手应安装在底门板上，左右居中，横向中心线与方格的下端边缘线对齐。

　　The handle should be installed on the bottom door panel, centered left and right, with the horizontal centerline aligned with the lower edge of the grid.

　　九、锁的安装

　　9、 Installation of locks

　　锁眼要用专门的开孔器，开在从下往上数的第三块门板的中心位置，安装时锁槽一律向下，背帽一定要拧紧。

　　The lock hole should be opened with a specialized hole opener at the center position of the third door panel counted from bottom to top. When installing, the lock groove should be facing downwards, and the back cap must be tightened.

　　车库门安装注意事项

　　Precautions for garage door installation

　　为了确保您的，减少事故发生，安装之前请您务必详尽地阅读安装使用手册，并严格按照安装使用手册提示的步骤进行操作。如果您在操作中遇到疑难问题，请您咨询安装人员或经销商。

　　To ensure your safety and reduce accidents, please read the installation manual carefully before installation and strictly follow the steps indicated in the manual. If you encounter any difficult problems during operation, please consult a professional installer or dealer.

　　1、安装时务必请安装人员对门体进行检查，只允许在平衡良好的门体上安装开门机，否则可能造成严重的后果。

　　1. During installation, it is necessary to ask the installation personnel to inspect the door body. Only allow the installation of the door opener on a well balanced door body, otherwise it may cause serious consequences.

　　2、门体正在运行时，严禁人或物体从门体下方通过，或在门体下方停留。

　　2. When the door is in operation, it is strictly prohibited for people or objects to pass through or stay under the door.

　　3、禁止在看不到门体运行情况的地方操作遥控器，以免造成事故或车库门误开。

　　3. It is prohibited to operate the remote control in places where the operation of the door cannot be seen, in order to avoid safety accidents or accidental opening of the garage door.

　　4、门体两侧水平导要求、质量标准和标准，是客户选购自动门的选择。

　　4. The horizontal guide requirements, quality standards, and safety standards on both sides of the door make it the best choice for customers to purchase automatic doors.

　　以上就是车库门尺寸的相关介绍，希望对大家有所帮助。

　　The above is an introduction to the size of garage doors, hoping to be helpful to everyone.

　　本文由  济南车库门  友情奉献.更多有关的知识请点击  http://www.jnzxmy.com/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Garage Door For more related knowledge, please click http://www.jnzxmy.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.