电动卷帘门在使用过程中,可能会出现以下需要调节的情况:

During use, electric roller shutter doors may encounter the following situations that require adjustment:

1. 运行速度过快或过慢

1. Running speed too fast or too slow

使用调速封装体调节速度即可。优先摸手卡控制速度后再调肢瞎整。

Use the speed control package to adjust the speed. First touch the hand card to control the speed before adjusting the limbs for blind adjustment.

2. 升降拉伸不平衡

2. Uneven lifting and stretching

调节升降电机中心位置、拉伸系统张紧度以解决问题。

Adjust the center position of the lifting motor and the tension of the stretching system to solve the problem.

3. 停止位置不准

3. Inaccurate stop position

调节限位开关位置,设置正确的升降和拉开位置。

Adjust the position of the limit switch and set the correct lifting and pulling positions.

4. 噪声大或振动

4. High noise or vibration

对电机和减速机进行调节以尽量噪音和振动。

Adjust the motor and reducer to minimize noise and vibration.

5. 不平顺运行

5. Uneven operation

调节传动链条张力,保持链条与齿轮匹配。使咐尘运转过程更加平顺。

Adjust the tension of the transmission chain to maintain the matching between the chain and the gear. Make the operation process of the charging dust smoother.

具体做法主要是:

The specific methods mainly include:

1) 检查所有螺丝是否有松动,必要时拧紧。

1) Check if all screws are loose and tighten if necessary.

2) 检查齿轮是否齐全、齿距协调。如果齿轮破损需要更换。

2) Check if the gears are complete and the tooth pitch is coordinated. If the gear is damaged, it needs to be replaced.

3) 检查限位开关是否工作正常,需要的话进行调节。

3) Check if the limit switch is working properly and adjust it if necessary.

4) 使用提供的调节器调节速度和脉冲频率。

4) Use the provided regulator to adjust the speed and pulse frequency.

5) 根据运作情况不断微调电机和减速机以改善运行。

5) Continuously fine tune the motor and reducer according to the operation situation to improve operation.

具体调节方法如下：

The specific adjustment method is as follows:

1、试机前应先松开限位机构上的锁紧螺钉，用手拉动环形链条使门帘离地面1米左右。

1. Before testing the machine, the locking screw on the limit mechanism should be loosened first, and the circular chain should be pulled by hand to keep the door curtain about 1 meter above the ground.

2、先试“上”、“停”、“下”按键，观察卷门升、停、降各功能是否灵敏可靠。

2. Try the "up", "stop", and "down" buttons first, and observe whether the functions of the rolling door up, stop, and down are sensitive and reliable.

3、若正常即可将门帘上升或下降到确定的位置，旋转限位螺套，调整碰微动开关滚轮，听到“滴答”声后，拧紧锁紧螺钉。

3. If it is normal, you can raise or lower the door curtain to the designated position, rotate the limit screw, adjust it to touch the micro switch roller, and when you hear a ticking sound, tighten the locking screw.

4、反复调试，当限位达到位置时，将锁紧螺钉用力旋紧即可。

4. After repeated debugging, when the limit reaches the optimal position, tighten the locking screw firmly.