目录：

　　catalogue

　　1.防盗门、卷帘门快速破拆技术

　　1. Rapid dismantling technology for anti-theft doors and rolling shutter doors

　　2.机械锁体防盗门破拆步骤

　　2. Steps for dismantling the mechanical lock body anti-theft door

　　3.常见防盗门基础破拆技术

　　3. Common anti-theft door foundation dismantling techniques

　　一

　　one

　　防盗门破拆技术

　　Anti theft door breaking and dismantling technology

　　此方法适用于普通家用防盗门中的普通面板式和指纹面板式门锁。所需器材：大力钳、“一”字螺丝刀步：用大力钳夹牢门锁面板两侧，对其进行破拆，使其露出内部锁芯。第二步：用大力钳尾部“破拆头”套牢锁芯并将其折断。第三步：用“一”字螺丝刀深入锁芯孔洞拨动锁芯拨片。第四步：用“一”字螺丝刀深入门把手处孔洞旋钮即可完成开启。备注：目前市面各类防盗门均适应此种方法。

　　This method is applicable to ordinary panel and fingerprint panel door locks in ordinary household anti-theft doors. Required equipment: pliers, "one" screwdriver. Step 1: Use pliers to clamp both sides of the door lock panel, and break and remove it to expose the internal lock core. Step 2: Use a pair of pliers to secure the lock cylinder and break it. Step 3: Use a "one" screwdriver to enter the lock cylinder hole and move the lock cylinder paddle. Step 4: Use a "one" screwdriver to enter the hole on the door handle and turn the knob to complete the opening. Note: Currently, all types of anti-theft doors on the market are suitable for this method.

　　二

　　two

　　卷帘门破拆技术

　　Rolling shutter door dismantling technology

　　（一）普通卷帘门（窄条式）所需器材：手电钻、破拆工具种方法：拆卸边框螺丝。

　　（1） Equipment required for ordinary rolling shutter doors (narrow strip type): hand drill, dismantling tool. The first method is to remove the frame screws.

　　步：用标准17mm螺母（具体结合固定门板螺母尺寸选取）手电钻对卷帘门边框的固定螺丝进行拆卸。

　　Step 1: Use a standard 17mm nut (selected based on the size of the fixed door panel nut) and a handheld drill to remove the fixing screws of the roller shutter door frame.

　　第二步：螺丝拆卸后直接用铁挺、螺丝刀等工具撬动边缝，使其与墙体整体分离，达到破拆效果，从而打开通道。第二种方法：利用无齿锯破拆。所需器材：无齿锯步：用无齿锯对卷帘门进行纵向切割。第二步：抽拉卷帘门板条，即可完成快速破拆。（二）翻板卷帘门（固定点在屋内顶棚）所需器材：无齿锯步：沿着翻板门拼接处用无齿锯进行纵向切割。只需2次纵向直线切割即可开启足够大的通道。第二步：对切割部位进行推撞，使其掉落。经辽源支队对市面常见防盗门和防盗卷帘门的调研和专项专项训练，防盗门破拆时间一般在35秒内，窄条式防盗卷帘门整体拆除时间一般在50秒内、无齿锯破拆抽条方式一般在1分钟内，翻板式卷帘门无齿锯破拆一般在40秒内。

　　Step 2: After disassembling the screws, use tools such as iron braces and screwdrivers to pry open the edge seams and separate them from the wall as a whole, achieving the effect of breaking and disassembling, thereby opening the passage. The second method is to use a toothless saw to break and dismantle. Equipment required: Toothless saw Step 1: Use a toothless saw to longitudinally cut the rolling shutter door. Step 2: Pull the roller shutter door slats to complete the rapid demolition. （2） Equipment required for the flip up rolling shutter door (fixed on the indoor ceiling): Toothless saw. Step 1: Cut longitudinally along the joint of the flip up door using a toothless saw. Only 2 longitudinal straight cuts are needed to open a sufficiently large channel. Step 2: Push and collide the cutting area to make it fall off. According to the research and specialized training conducted by the Liaoyuan Support Team on common anti-theft doors and anti-theft rolling shutter doors in the market, the dismantling time for anti-theft doors is generally within 35 seconds, the overall dismantling time for narrow strip anti-theft rolling shutter doors is generally within 50 seconds, the toothless saw dismantling method is generally within 1 minute, and the toothless saw dismantling method for flip type rolling shutter doors is generally within 40 seconds.

　　四平支队防盗窗快速破拆技术规程

　　Technical regulations for rapid breaking and dismantling of anti-theft windows in Siping Detachment

　　一、防盗窗结构形式：选择常见的实心圆柱钢筋或不锈钢管防盗窗。二、破拆器材选择：冷切锯或角磨机

　　1、 Anti theft window structure form: Choose common solid cylindrical steel bars or stainless steel tube anti-theft windows. 2、 Selection of demolition equipment: cold cutting saw or angle grinder

　　三、破拆方法：步骤1：一名救援人员携带冷切锯或角磨机沿消防拉梯攀登所需破拆窗口处。步骤2：根据救援需要确定破拆的尺寸大小。步骤3：按照确定的尺寸，利用冷切锯或角磨机切割防盗窗横向、竖向钢筋，打通救援通道。四、破拆时间：1分钟                                                                                                                       已关注                                                                             关注                                                                 重播                                                        分享                                                                     赞                                                                                                                       关闭观看更多更多退出全屏切换到竖屏全屏退出全屏应急救援技战术已关注分享视频，时长00:460/000:00/00:46 切换到横屏模式 继续播放进度条，百分之0播放00:00/00:4600:46倍速全屏 倍速播放中  0.5倍  0.75倍  1.0倍  1.5倍  2.0倍  流畅  您的浏览器不支持 video 标签 继续观看 消防员防盗、卷帘门快速破拆开锁技术（附教学片） 观看更多转载,消防员防盗、卷帘门快速破拆开锁技术（附教学片）应急救援技战术已关注分享点赞在看已同步到看一看写下你的评论                                 视频详情

　　3、 Dismantling method: Step 1: A rescue worker carries a cold saw or angle grinder and climbs along the fire ladder to the required dismantling window. Step 2: Determine the size of the demolition according to the rescue needs. Step 3: Use a cold saw or angle grinder to cut the horizontal and vertical steel bars of the anti-theft window according to the determined size, and open up the rescue passage. 4、 Broken down time: 1 minute. Followed, followed, replayed, shared, liked, closed, watched more, exited full screen, switched to vertical screen, exited full screen, responded to emergency rescue techniques and tactics. Followed and shared video, duration 00:460/00:00/00:46. Switch to landscape mode and continue playing progress bar, 0% playback 00:00/00:4600:46 times full screen speed playback 0.5 times 0.75 times 1.0 times 1.5 times 2.0 times smooth Your browser does not support video tags Continue watching Firefighter anti-theft and rolling shutter door quick breaking and unlocking technology (with tutorial) Watch more reposts, Firefighter anti-theft and rolling shutter door quick breaking and unlocking technology (with tutorial) Emergency rescue techniques and tactics Follow, share, like, synchronized to watch, write your comment video details

　　四平支队防盗门快速破拆技术规程

　　Technical regulations for rapid breaking and dismantling of anti-theft doors in Siping Detachment

　　一、防盗门结构形式：选择常见的实体式防盗门，结构包括有內锁舌、侧锁舌、天地锁舌，并全部处于开启状态。二、破拆器材选择：手动破拆工具、便携式液压扩张器

　　1、 Structure of anti-theft door: Choose a common solid anti-theft door, which includes internal locking tongue, side locking tongue, and sky and earth locking tongue, all of which are in the open state. 2、 Selection of demolition equipment: manual demolition tools, portable hydraulic expanders

　　三、破拆方法：步骤1：一名救援人员利用手动破拆工具组对防盗门横向门锁处的上部防撬边进行开缝，打开扩张空间后，对防盗门采取限位措施。步骤2：另一名救援人员利用便携式液压扩张器强行扩张防盗门，直房门打开。四、高温门控技术：防盗门破拆后，及时关闭，并采取高温门控技术，防止轰然回燃。五、破拆时间：1分钟

　　3、 Dismantling method: Step 1: A rescue worker uses a manual dismantling tool set to open the upper anti pry edge of the transverse door lock of the anti-theft door, and after opening the expansion space, takes limiting measures on the anti-theft door. Step 2: Another rescuer uses a portable hydraulic expander to forcefully expand the anti-theft door until the door opens. 4、 High temperature door control technology: After the anti-theft door is broken, it should be closed in a timely manner, and high-temperature door control technology should be adopted to prevent a loud rebound. 5、 Dismantling time: 1 minute

　　防盗门基本概况

　　Basic Overview of Anti theft Doors

　　机械锁体防盗门破拆步骤

　　Mechanical lock body anti-theft door breaking and dismantling steps

　　视频详情

　　Video Details

　　步：准备强力破拆钳和一字螺丝刀。

　　Step 1: Prepare strong pliers and a straight screwdriver.

　　第二步：使用强力破拆钳嘴对门锁外观进行清理破拆，左右扭动，直卸下。

　　Step 2: Use a powerful pliers to clean and disassemble the appearance of the door lock, twist it left and right until it is removed.

　　第三步：使用套锁嘴对锁芯进行强力破拆并清理相关部件。

　　Step 3: Use a locking nozzle to forcefully disassemble the lock cylinder and clean the relevant components.

　　第四步：使用一字螺丝刀对锁具进行拨动，使锁牙回弹。

　　Step 4: Use a Phillips screwdriver to turn the lock and make the locking teeth rebound.

　　第五步：再次使用螺丝刀对保险装置进行拨动。

　　Step 5: Use the screwdriver again to turn the safety device.

　　指纹锁体防盗门破拆步骤

　　Steps for dismantling fingerprint lock body anti-theft door

　　一、破拆完面板后，使用老虎钳对方杆进行回拨，就可以将门打开。

　　1、 After dismantling the panel, use pliers to pull back the lever to open the door.

　　二、在复杂的情况下，用一字螺丝刀对下保险进行回拨，往其开门位置回拨，使其处于开启位置。

　　2、 In complex situations, use a flathead screwdriver to retract the lower safety device and move it back to its open position to keep it in the open position.

　　三、再次使用螺丝刀对中间的保险装置进行回拨，使其处于复位的位置。

　　3、 Use the screwdriver again to retract the middle safety device to its reset position.

　　四、使用老虎钳对方杆进行转动，门就可以开启。

　　4、 Finally, use pliers to rotate the lever and the door can be opened.

　　五、当我们破拆时，方杆掉落后可以使用螺丝刀进行转动，往门开启的位置进行拨动。

　　5、 When we dismantle it, the square pole can be rotated with a screwdriver to move towards the open position of the door after it falls off.

　　破拆现场操作

　　On site demolition operation

　　注意事项：一、破拆时，穿戴好个人防护装备，佩戴好护目镜。二、必要时在水枪掩护下进行。三、人员交叉步站立、手握锁嘴末端，利用杠杆原理进行有效撬动。四、针对不同类型锁体，要根据其结构特点，注意锁梯拨动位置、方向。

　　Attention: 1. When dismantling, wear personal safety protective equipment and goggles. 2、 If necessary, conduct under the cover of a water gun. 3、 Personnel stand cross legged, holding the end of the lock mouth, and use the principle of leverage to effectively pry it. 4、 For different types of lock bodies, attention should be paid to the position and direction of the lock ladder according to their structural characteristics.

　　常见防盗门基础破拆技术

　　Common anti-theft door foundation dismantling techniques

　　防盗门破拆技术

　　Anti theft door breaking and dismantling technology

　　防盗门破拆技术是我们进入火灾现场的步，这一步非常关键，直接影响着我们初期火灾的处置效果。这里我们为大家演示的两种技术，分别是Hallgan破拆技术和精准破拆技术。这两种破拆技术结合着用基本上可以破拆大部分的防盗门。

　　The anti-theft door breaking and dismantling technology is the first step for us to enter the fire scene, which is very crucial and directly affects the effectiveness of our initial fire disposal. The two technologies we are demonstrating here are Hallgan disassembly technology and precision disassembly technology. These two dismantling techniques combined can basically dismantle most anti-theft doors.

　　Hallgan基础破拆技术1.到达起火房间门前，利用hallgan敲击上、中、下，通过Hallgan手感反馈和观察门动作来判断锁舌的位置以及锁的类型，如果是天地锁我们立刻采用精准破拆，单道锁我们继续采用hallgan破拆。2.清楚锁舌的大概位置后，我们可以选择在锁舌上下10cm处开展hallgan破拆。经过市场调研我们大部分入户门都是外开门，这里我们将hallgan锄段赛入门缝，制造缝隙。3.找到位置后开始破拆，这要注意控制hallgan的班长要指挥板斧手开展破拆，前期班长要不断观察和感受hallgan的反馈，不断调整hallgan锄端的角度，使他更加深入门缝。4.不断调整锄段的角度是因为防盗门都有防撬边，我们需要调整角度越过防撬边深入到门缝中，当我们突破防撬边以后，班长要指挥板斧手开始持续敲击hallgan，直到深入锄端的三分之二5.板斧手要及时撤出，以为就像图中所示有受伤风险，班长在末端发力利用杠杆原理来起翘防盗门，由于这款破门为了重复训练采用了高强度材料，一般的如何防盗门强度没有这么高这里我们也可用图二的方式扩大门缝达到开门的效果6.开门时我们要注意，要背对着门，“后蹬”开门，这样我们可以保证。关于板斧手

　　Hallgan basic dismantling technique: 1. When reaching the door of the room on fire, use Hallgan to tap up, middle, and down. Use Hallgan tactile feedback and observe the door movement to determine the position of the lock tongue and the type of lock. If it is a sky and earth lock, we immediately use precise dismantling. For single track locks, we continue to use Hallgan dismantling. 2. After understanding the approximate position of the lock tongue, we can choose to carry out Hallgan dismantling at 10cm above and below the lock tongue. After market research, most of our entrance doors are external doors. Here, we will race the Hallgan hoe into the door gap to create a gap. 3. After finding the location, start dismantling. Pay attention to controlling the team leader of the Hallgan to command the hatchet operator to carry out the dismantling. In the early stage, the team leader should constantly observe and feel the feedback from the Hallgan, adjust the angle of the Hallgan hoe, and make it deeper into the door crack. 4. Continuously adjusting the angle of the hoe section is because anti-theft doors all have anti pry edges, and we need to adjust the angle beyond the anti pry edges and deep into the door gap. When we break through the anti pry edge, the team leader needs to command the board axe hand to continuously strike the hallgan until it reaches two-thirds of the hoe end. Open the door, so we can ensure our center of gravity. Regarding the Axe and Axe Hand

　　1.破拆侧手握紧斧头根处，另一只手握紧末端，可采用半跪姿，如图所示，利用肘部和膝盖形成支点，根据破拆班长的指挥开展破拆。板斧垂直地面进行敲击，基本可以适用大部分狭小环境2.环境允许的情况下板斧手要避开整个门口，做好极端情况下的应急避险。

　　1. Hold the axe root tightly with one hand on the dismantling side, and grip the end tightly with the other hand. You can adopt a semi kneeling position, as shown in the picture, using your elbows and knees to form a fulcrum, and carry out the dismantling according to the command of the dismantling squad leader. The board axe can be used to strike vertically on the ground and is generally suitable for most narrow environments. 2. If the environment allows, the board axe operator should avoid the entire doorway and take emergency measures in extreme situations.

　　防盗门破拆技术防盗门破拆技术是我们进入火灾现场的步，这一步非常关键，直接影响着我们初期火灾的处置效果。Hallgan破拆技术和精准破拆技术结合使用基本上可以破拆大部分的入户防盗门这期我们讲解的是精准破拆技术。

　　The anti-theft door dismantling technology is the first step for us to enter the fire scene, which is very crucial and directly affects the effectiveness of our initial fire disposal. The combination of Hallgan dismantling technology and precision dismantling technology can basically dismantle most of the anti-theft doors in households. In this issue, we will explain precision dismantling technology.

　　精准破拆技术1.利用大力钳破拆面板经过判断，入户防盗门是“天地锁”，我们立即采用精准破拆技术，如图我们为了更方便的展示门锁的相对位置采用了亚克力教具模拟防盗门，这里也可以使用hallgan等破拆器材开展对锁面板的破拆。

　　Precise dismantling technology 1. Using a powerful pliers to dismantle the panel. After judgment, the anti-theft door entering the house is a "heaven and earth lock". We immediately adopted precise dismantling technology. As shown in the picture, we used acrylic teaching aids to simulate anti-theft doors for more convenient display of the relative position of the door lock. Here, we can also use dismantling equipment such as Hallgan to dismantle the lock panel.

　　面板中间的连接是两根长螺丝钉，破拆相对容易。2.利用大力钳破拆锁芯拆掉面板以后，锁芯会暴露在我们面前，我们可以使用大力钳后面的拆锁芯工具进锁芯的拆卸，也可以使用钳子将锁芯拆掉，锁芯与锁体的连接很薄弱，我们可以轻易地将锁芯卸下。3.利用锁匠工具进行开锁拆掉锁芯后我们可以直接使用锁匠工具，深入锁体进行开锁。

　　The connection in the middle of the panel is made up of two long screws, which are relatively easy to break and remove. 2. After removing the panel, the lock cylinder will be exposed in front of us. We can use the lock cylinder removal tool behind the pliers to remove the lock cylinder, or use pliers to remove the lock cylinder. The connection between the lock cylinder and the lock body is very weak, so we can easily remove the lock cylinder. 3. Use locksmith tools to unlock. After removing the lock cylinder, we can directly use locksmith tools to enter the lock body for unlocking.

　　关于开锁

　　About unlocking

　　无论是密码锁还是指纹锁，只是锁的面板面板有所不同，其结构都是由三部分组成即“锁体、锁芯、面板”，我们步都需要将锁的面板先拆下，让锁芯暴露出来，而后拆掉锁芯在锁体进行开锁作业。

　　Whether it is a password lock or a fingerprint lock, the only difference is the panel of the lock, which is composed of three parts: the lock body, the lock core, and the panel. The first step is to remove the panel of the lock to expose the lock core, and then remove the lock core to unlock the lock body.

　　锁体结构这是我们制作的教具，我们可以清晰的看到锁体的作用模式，当我们破拆锁芯会出现，锁芯有一半留在锁体内部的情况，这时候无法使用锁匠工具，这里我们可以使用扁口螺丝刀来进行技术作业。

　　The lock body structure is the teaching tool we made, and we can clearly see the mode of action of the lock body. When we break and dismantle the lock core, there will be a situation where half of the lock core is left inside the lock body. At this time, locksmith tools cannot be used. Here, we can use a flat screwdriver for technical operations.

　　锁体中主要是这两个结构来控制锁舌来实现锁定与解锁，我们就是通过扁口螺丝刀压推这两个构件来实现开锁。

　　In the lock body, these two structures are mainly used to control the lock tongue to achieve locking and unlocking. We use a flat screwdriver to push these two components to achieve unlocking.

　　拨动构件将扁口螺丝刀与构件垂直，向上推动下层构件，解锁了下层构件后我们横向拨动上层构件实现解锁的动作。

　　To move the component, first place the flat screwdriver perpendicular to the component and push the lower component upwards. After unlocking the lower component, we move the upper component horizontally to achieve the unlocking action.

　　这是市面上常见的几款锁体，他们的解锁技术都是一样的。实战模拟灾情设定

　　These are the most common lock bodies on the market, and their unlocking technology is the same. Practical simulation disaster setting

　　Scenario setting后巷北三库房门由于钥匙断在锁芯内，根据换门需求，对北三库房门开展破拆。

　　Scenario setting: Due to the key being broken in the lock cylinder, the door of the North Third Warehouse in the back alley has been dismantled and broken according to the door replacement requirements.

　　判断为天地锁，选择使用精准破拆技术。

　　Judging as a heaven and earth lock, choose to use precise dismantling technology.

　　使用大力钳将面板破坏，露出锁芯。

　　Use pliers to break the panel and expose the lock cylinder.

　　在破拆锁芯保护的时候非常容易将锁芯也破坏，容易将锁芯的一半留在锁体内，这时候我们可以使用短款的锁匠工具或者使用一字螺丝刀

　　When dismantling the lock cylinder protection, it is very easy to damage the lock cylinder as well, and it is easy to leave half of the lock cylinder inside the lock body. At this time, we can use a short locksmith tool or a straight screwdriver

　　前期使用一字螺丝刀解锁，由于锁体锈蚀较重，改用短款锁匠工具，成功解锁。成功保住门体，后期开展锁体更换 ^ v ^ 。

　　In the early stage, a flathead screwdriver was used to unlock the lock, but due to severe rusting of the lock body, a shorter locksmith tool was used and successfully unlocked. Finally, the door was successfully secured and the lock replacement will be carried out later.

　　防盗门的破拆我们要多种技术相结合的来运用，根据不同警情、不同门锁结构来使用不同的破拆门技术，这样才能迅速的完成破拆任务。

　　We need to use a combination of multiple techniques to break down anti-theft doors. Different door breaking techniques should be used according to different alarm situations and lock structures, in order to efficiently and quickly complete the breaking task.

　　本文由  济南卷帘门 友情奉献.更多有关的知识请点击  http://www.jnzxmy.com/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Rolling Shutter Doors For more related knowledge, please click http://www.jnzxmy.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.