但凡事利与弊参半，正因为新型工业快速门拥有很多项优异性能，装备的配件种类繁多，偶尔出现一些小故障，影响产品本身的使用也在所难免。因此，小编为大家总结了一些工业快速门使用过程中因操作不当常见的问题及解决方法。

But everything has its pros and cons, precisely because the new industrial fast door has many excellent performances and a wide variety of accessories, occasional minor malfunctions that affect the use of the product itself are inevitable. Therefore, the editor has summarized some common problems and solutions caused by improper operation during the use of industrial rapid doors.

比如遇到一些常见的门体上升到顶部后无法下落等问题，可快速自行解决，节约售后维护时长，提升生产效率。

For example, when encountering some common problems such as the door body rising to the top and unable to fall down, it can be quickly solved by itself, saving after-sales maintenance time and improving production efficiency.

原因一：

Reason 1:

对门框两侧安装的两个射频红外线发射器受到撞击或者其他外力影响出现位移，发射的红外信号无法形成对射，会导致光电系统失效。

The two RF infrared emitters installed on both sides of the door frame may experience displacement due to impact or other external forces, resulting in the inability of the emitted infrared signals to form opposition and causing the failure of the photoelectric system.

解决方法：

Solution:

重新校正红外线发射器位置，重新达到对射效果，即可解决问题。

Re calibrate the position of the infrared emitter to achieve the opposite effect, which can solve the problem.

原因二：

Reason 2:

门体下方地磁感应线圈感应到门框内有金属物体存在，导致发出障碍物信号，门体将锁定无法下落。

The geomagnetic induction coil below the door detects the presence of a metal object inside the door frame, causing an obstacle signal to be emitted, and the door will be locked and unable to fall.

解决方法：

Solution:

移除地磁感应线圈附近的金属障碍物问题即可解决。

Removing metal obstacles near the geomagnetic induction coil can solve the problem.

原因三：

Reason Three:

微波雷达辐射扇形半径范围内有移动物体存在，导致发出障碍物光电信号，门体无法闭合。

The presence of moving objects within the fan-shaped radius of microwave radar radiation results in the emission of obstacle photoelectric signals, preventing the door from closing.

解决方法：

Solution:

清空微波雷达辐射半径内的障碍物，问题即可解决。

Clearing obstacles within the radiation radius of the microwave radar can solve the problem.

如果遇到疑难杂症或问题未解决等情况，应及时与售后联系，售后人员会及时到现场检测处理，或访问综合门业官网查询解决办法。

If encountering difficult and complicated problems or unresolved issues, it is necessary to contact the after-sales service in a timely manner. The after-sales personnel will promptly go to the site for testing and handling, or visit the official website of the comprehensive door industry to find solutions.