水晶卷帘门一般有中装、内装、外装三种安装方式，不同的安装方式有不同的配置需求，也有各自的优势与劣势，要根据现场环境和客户的具体要求选择合适的安装方式。下面济南卷帘门厂家为您讲解相关事项。

There are generally three kinds of installation methods for crystal roller shutter doors: medium decoration, interior decoration and exterior decoration. Different installation methods have different configuration requirements, as well as their own advantages and disadvantages. Appropriate installation methods should be selected according to the site environment and the specific requirements of customers. Next, Jinan roller shutter door manufacturer will explain relevant matters for you.

水晶卷帘门的安装方式：

Installation method of crystal roller shutter door:

1、中装：将卷帘门窗安装在建筑物预留的洞口内

1. Medium decoration: install rolling shutter doors and windows in the reserved openings of buildings

2、内装：将卷帘门窗贴装在建筑物预留洞口内墙面

2. Interior decoration: install the rolling shutter doors and windows on the inner wall of the reserved opening of the building

3、外装：将水晶卷帘门窗贴装在建筑物预留洞口外墙面

3. Exterior decoration: mount the crystal roller shutter doors and windows on the outer wall of the reserved opening of the building

水晶卷帘门的安装步骤：

Installation steps of crystal roller shutter door:

1、确定安装卷帘门的位置，并用线坠、水平尺等工具进行标注，找准水平线和垂直线。

1. Determine the installation position of the roller shutter door, mark it with plumb bob, level ruler and other tools, and align the horizontal line and vertical line.

2、根据定位的划线开始安装卷帘门的边框。

2. Start to install the frame of the roller shutter door according to the marked line.

3、根据卷门机的说明书所提示的方法步骤以及注意事项进行卷帘门机的安装。

3. Install the roller shutter door machine according to the method steps and precautions indicated in the manual of the roller shutter door machine.

4、将组装好的卷帘门体固定好，然后将限位器找准位置装上，并试着运转。进行滑道、手动机构、包箱的安装。

4. Fix the assembled roller shutter door, and then install the stopper at the correct position and try to run. Install the slide, manual mechanism and bag box.

注意：

be careful:

所有电动控制的卷帘门，启闭运行方向须与开关箱指示相同，特别是在新接通电源试车或外来输入电源变换相线时，维修电动卷帘门电机应先使用手动装置将门帘置于门洞高度1/2的位置，接通电源后试操作卷门启闭，直到与指示相附，方可正常使用，否则损坏限位器，引起卷帘反卷或冲顶等而造成损失。

The opening and closing operation direction of all electrically controlled roller shutter doors shall be the same as that indicated by the switch box. In particular, when the power supply is newly connected for trial run or the external input power is used to change the phase line, the motor of the electric roller shutter door shall be maintained by first using the manual device to place the door curtain at the position of 1 / 2 of the door opening height. After the power supply is connected, the roller shutter shall be operated for trial operation until it is attached with the indication. Otherwise, the stopper will be damaged, Causing the roller shutter to reverse roll or rush to the top and causing losses.

卷帘门门帘和易锈部位，应进行定期防腐、油漆及保养处理，禁止用重物、硬物冲击门面。

The rolling shutter door curtain and rust prone parts shall be regularly treated with anti-corrosion, paint and maintenance. It is prohibited to impact the door surface with heavy objects and hard objects.

卷帘门运行时如有发生较大抖动或异常声音时应停机检查，排除有碍门帘正常启闭的杂物。

In case of large shaking or abnormal sound during the operation of the rolling shutter door, stop the machine for inspection to eliminate the sundries that hinder the normal opening and closing of the shutter.

水晶卷帘门是现在许多大型或者车库所需要安装的一种门，既开关方便，又节省空间，因此应用的比较广泛，在生活中很多地方都能见到，那么您有购买需求就可以来关注我们网站http://www.jnzxmy.com咨询了解相关事项了。

Crystal roller shutter door is a kind of door that needs to be installed in many large shopping malls or garages. It is convenient to open and close and saves space. Therefore, it is widely used and can be seen in many places in life. If you have a purchase demand, you can follow our website http://www.jnzxmy.com Consulted to understand relevant matters.